Winston Salem Quality Drywall : Residential & Commercial Installation & Repair
Trusted Drywall Contractor in Winston Salem, NC
Winston Salem Quality Drywall handles installation, repair, and finishing work for homeowners and businesses throughout Winston-Salem, NC, backed by experience in projects from small patches to full room renovations. Whether you're dealing with water damage, planning a remodel, or finishing a new build, our team brings the tools and know-how to get the job done right.
Serving Winston-Salem, we help homeowners, contractors, and commercial property managers achieve clean, professional walls with gypsum board installation, taping, joint compound application, Level 4 and Level 5 finishing, and custom wall textures. Our techniques account for local climate conditions to promote proper drying, minimize seam cracks, and deliver lasting results.
Get a FREE Quote
Our Residential Drywall Services
Residential Drywall Installation
We install drywall in new rooms, additions, and existing spaces that need new wall surfaces. Before hanging panels, we review the framing, planned fixtures, and locations of electrical boxes so the finished walls fit the room.
Residential Drywall Repair & Patching
Holes, cracks, dents, and damaged corners need different repairs. We assess the damage, remove loose material, and use a patch or replacement panel that has firm backing. Then we tape, apply joint compound, sand, and prepare the area for primer.
Drywall Ceiling Repair & Installation
Ceilings place extra demands on drywall because panels must stay secure overhead and joints remain visible in direct or angled light. We install ceiling panels with appropriate fastening and finish the seams for a consistent surface.
Drywall Finishing & Texture Matching
Drywall finishing turns visible panel joints and fasteners into a surface ready for its final coating. We apply tape and joint compound in successive coats, allow each coat to dry, and sand the surface between stages as needed. We discuss the finish you want before work starts. A smooth wall under strong side lighting needs more careful surface preparation than a wall that will receive texture.
Fire-Rated & Mold-Resistant Drywall Installation
Some locations require drywall that meets specific building requirements. We review the planned wall or ceiling assembly, then install the specified panels and related materials for that assembly. A fire rating applies to the complete assembly, including its framing, fasteners, joints, and penetrations.
Drywall Remodeling & Renovation
Remodeling often leaves openings where a wall moved, a doorway changed, or electricians and plumbers accessed hidden systems. We install new drywall and tie it into the existing surfaces after the underlying work is complete. Matching an older room takes attention to wall thickness, corners, and existing texture. We check these details before closing openings and finishing joints.
Garage Drywall Installation
Garage drywall needs to suit the garage’s connection to the home and the way you use the space. We review the wall and ceiling layout, including doors, storage areas, and access panels, before installing panels.
Where a garage adjoins living space, the
required separation depends on the building design and applicable code. We use the specified materials and installation details for that location.
Kitchen Drywall Installation
Kitchen walls bring together cabinets, outlets, plumbing, and several finish materials. We coordinate drywall installation with the layout so openings and panel edges do not interfere with fixtures or planned surfaces. We prepare painted areas for a consistent finish and account for backsplash locations during installation.
Water Damage Drywall Repair
Water can stain drywall, soften its core, loosen tape, and damage materials inside a wall or ceiling. We identify the affected drywall and discuss the repair after you address the source of the water. A plumbing leak, roof leak, or appliance failure must stop before replacement begins. We remove damaged sections where needed, allow the area to dry, and install new drywall after the cavity is ready to close.
Our Commercial Drywall Services
Commercial Drywall Installation
We install drywall on metal framing for new commercial spaces, expansions, and renovations. Before hanging panels, we review the plans, confirm wall heights and board types, and coordinate with the trades placing electrical, plumbing, and mechanical systems inside the walls.
Commercial Drywall Repair
Damaged drywall can affect a workspace’s appearance and leave walls vulnerable to further wear. We repair holes, dents, cracked joints, and sections removed for plumbing or electrical work in commercial interiors. We start by assessing the affected area and the cause of the damage.
Commercial Drywall Finishing & Level 5 Finishes
Drywall finishing determines how walls and ceilings look under your lighting. We tape joints, cover fasteners, apply joint compound, and sand between coats to prepare surfaces for primer and paint. We pay particular attention to corners, long walls, and areas near windows or directional lighting.
Commercial Drywall Ceilings & Soffits
We install drywall ceilings and soffits that accommodate the layout of a commercial space. These surfaces may conceal ductwork, define a reception area, or create transitions around lighting and other building systems.
Ceiling work requires coordination before panels go up. We review the framing layout and the planned locations of lights, diffusers, sprinklers, and access panels.
Fire-Rated & Soundproof Drywall Installation for Commercial Properties
A fire-rated wall depends on more than its drywall panels, so we coordinate with the project team on openings, joints, and penetrations handled by other trades. We also review sound-control details where offices, meeting rooms, or neighboring spaces need greater speech privacy.
Commercial Drywall Partitions & Office Build-Outs
Partitions shape how a commercial interior functions. We install drywall partitions for offices, meeting rooms, corridors, and other defined work areas according to the approved layout. During a build-out, we coordinate wall placement with door openings, glazing, power, data, and planned furniture locations.
Advanced Drywall Solutions
Specialty Drywall Materials
We select drywall based on where it will go and how the space will be used. Standard gypsum board suits many interior walls and ceilings, while abuse-resistant panels serve areas that face frequent bumps, such as busy hallways and workrooms.
Drywall Repair & Finishing
We repair holes, cracks, damaged corners, and areas affected by previous plumbing or electrical work. The repair starts with a stable surface. We remove loose material, secure the edges, and install a patch or replacement board sized to the opening.
Heavy-Duty Wall Mounting Solutions
Heavy items place demands on both the wall and the attachment points. We plan backing for cabinets, large televisions, shelving, grab bars, and similar fixtures when framing is open. Properly placed wood blocking or other specified supports give installers solid locations for fasteners.
Access Panels & Utility Openings
Pipes, valves, electrical equipment, and other building components sometimes need an opening after the drywall is complete. We place access panels where service personnel can reach the component and where the panel fits the wall or ceiling layout. We measure the required opening, frame or reinforce its edges as needed, and install a panel suited to the location.
Fire-Rated & Soundproof Drywall Systems
Fire-rated walls and ceilings depend on the complete assembly, including framing, board
type, layers, fasteners, joints, and penetrations. For sound control, we discuss where noise travels and what the room needs. Additional board layers, insulation, sealant, and isolation details can improve a wall or ceiling when they form part of a planned system.
Bathroom & Moisture-Resistant Drywall Solutions
Bathrooms need materials suited to each surface. We use moisture-resistant drywall where the project specifications call for it, such as appropriate areas outside direct water exposure. Shower and tub surrounds require a tile backer and waterproofing system designed for wet locations.
Drywall Materials, Finishes & Installation Solutions
Drywall Panels & Wallboard Systems
We use standard drywall panels for many interior walls and ceilings. Panel thickness, framing spacing and the planned finish guide our selection. We measure each area and plan sheet placement to limit unnecessary seams and support panel edges. For surfaces that receive tile and direct water exposure, we identify the appropriate backer material before installation.
Drywall Taping, Mudding & Joint Finishing
We reinforce seams with joint tape, apply joint compound in successive coats and cover fastener heads. Each coat needs time to dry or set before we build out and smooth the joint. Careful feathering helps seams blend into the surrounding panels. We choose tape and compound for the joint and repair conditions.
Drywall Corner Bead & Edge Protection
Outside corners take contact from furniture, cleaning equipment and daily use. We install corner bead to create a straight edge and protect the drywall beneath it. Metal, vinyl and paper-faced products offer different fastening and finishing options, so we match the bead to the corner and its surroundings. We align the bead, secure it and build joint compound out from the edge to meet the wall surface.
Drywall Finishing & Surface Preparation
We prepare drywall for the finish you plan to apply. After the final compound coat, we sand and inspect joints, corners and fastener locations under useful lighting. We remove sanding dust before primer goes on. Finish level matters when you choose smooth paint, dark colors or lighting that runs along a wall.
Modern Drywall Textures
Texture changes the appearance of a wall or ceiling and affects how future patches blend in. We discuss the look you want, then prepare the surface and select an application method for that finish. Common choices include orange peel and knockdown; smooth walls require careful finishing without an applied texture pattern.
Drywall Hardware & Installation Accessories
A durable installation depends on the materials behind the finished surface. We use drywall screws suited to the panel thickness and framing type, and we place fasteners at the spacing required for the assembly. We set screw heads below the panel face without
tearing the paper. We also plan for backing where cabinets, handrails or other heavy fixtures need structural support.
View Our Recent Projects
What to Expect When You Hire Us for Drywall Work
Step 1: Consultation and Project Planning
We begin with an on-site assessment to evaluate wall conditions, ceiling heights, framing, and any existing drywall damage. After discussing your goals, timeline, and budget, we provide a detailed estimate outlining the project scope, material requirements, and anticipated completion schedule.
Step 2: Surface Preparation and Drywall Installation
Before installation, we inspect wall studs and ceiling joists for uneven framing, moisture damage, and structural irregularities. We then select the appropriate gypsum board, carefully measure and cut each panel, and secure it with drywall screws while staggering joints to minimize cracking and create a durable, uniform surface.
Step 3: Taping, Mudding, and Finishing
We embed joint tape along seams and inside corners, apply multiple coats of joint compound, and install corner bead to reinforce exposed edges. Each coat is allowed to dry thoroughly before sanding and feathering the joints to achieve a smooth finish that meets the appropriate drywall finishing level for your project.
Step 4: Texture, Priming, and Final Inspection
Once the surface is properly prepared, we apply your selected finish, whether it's a smooth Level 5 finish, orange peel, knockdown texture, or a seamless match to existing walls. We then apply drywall primer to seal the porous joint compound and gypsum paper, followed by a final quality inspection and cleanup to leave the space ready for painting.
How Much Does Drywall Installation Cost in Winston Salem, NC?
Most drywall installation projects in Winston Salem cost between $2.50 and $4.50 per square foot, including materials and labor. Many homeowners spend roughly $1,000 to $4,500 on a typical room or small project. Larger jobs, such as basements or full renovations, can run higher.
Local labor rates sit slightly below the national average. Final pricing depends on the details of your space.
We provide free, itemized estimates for homes and businesses across Winston Salem. Our quotes list materials, labor, and finish level separately, so you can see where your money goes. You can contact us to schedule an on-site measurement.
Project Type | Typical Cost Range |
|---|---|
Small repair or patch | $150 – $600 |
Single room (walls and ceiling) | $1000 – $3000 |
Whole-home drywall installation | $8000 – $25000 |
Popcorn ceiling removal | $850–$3,000 |
Water-damaged drywall replacement | $450–$1,500+ |
Drywall installation (per square foot) | $1.70–$2.30 |
Our Service Area in Winston Salem, NC and Surrounding Cities
Winston Salem Quality Drywall serves homeowners and businesses across Winston Salem and nearby areas with professional drywall solutions. Our services include new drywall installation, surface finishing, sheetrock repairs, texture blending, and popcorn ceiling removal for residential and commercial spaces.
Our service area includes:
- High Point
- Kernersville
- Clemmons
- Lewisville
- Walkertown
- Burlington
- Lexington
- Mocksville
- Yadkinville
If your property is outside these communities, contact us anyway. We can tell you whether your location is within our travel range for your specific project.
What Our Customers Have to Say...
Drywall Installation and Repair in Winston Salem FAQs
We install, repair, and finish drywall for walls and ceilings. Our work includes patching damaged areas, taping joints, applying joint compound, and preparing surfaces for paint.
Yes. We work on drywall projects for homes and commercial spaces, including installation, repairs, and finishing.
Contact us with your project address, the areas that need work, and a brief description of the job. Photos and approximate dimensions help us assess the scope before we provide an estimate.
Yes. Finishing is the step that determines how smooth and even your walls look after paint.
We apply joint compound, tape, and sanding to the finish level your space requires. A garage may only need a basic
finish, while walls with bright lighting or glossy paint often call for a Level 5 skim coat.
When we repair part of a textured wall or ceiling, we match the existing pattern as closely as possible. We test the texture on a sample area first, then adjust the compound thickness and application method before blending it into the surrounding surface.
Yes. We offer drywall insulation installation as part of full-wall builds or remodels.
Yes. We specialize in custom drywall design for architectural features, including arches, curves, and built-ins.
Our start times depend on current scheduling and the size of your project. Smaller repair jobs often get scheduled within a few days, while larger installations may require additional lead time.
Once you approve an estimate, we provide a projected start date. We keep you updated if any scheduling adjustments come up before your project begins.
A small repair may take one visit, while installation and finishing can take several days. We set a schedule after
reviewing the work, including the time needed for joint compound to dry between coats.
Yes, we carry the licensing and insurance required to operate as a drywall contractor in North Carolina. This protects you and your property throughout the duration of your project.
We serve Winston-Salem and consider projects in nearby communities. Share your property address with us so we can
confirm availability.